BIOS password crack

BIOS is an acronym of Basic Input Output System. It's a type of firmware used during the booting process (power-on startup) on computers. The BIOS firmware is built into PCs, and it is the first software they run when powered on. In other words, BIOS is a software by which we can play with hardware settings. For example we can disable ports like USB ports or we can create password for start-up. So this post is all about how to disable that password. Well, this is the simplest thing i ever did in my life to crack password.

Procedure:

1. Disconnect every single power supply from the system(Don't forget to remove the battery from your laptop).

2. Now you need to find the battery or button cell on your system motherboard.

3. Remove that battery for a or two minutes.

4. Now place the battery into your motherboard.

5. Connect the power supply.

6.Turn-on your system and enjoy.

Note: Basically, this is the process of reset BIOS setting not just a process of password cracking. So remember that every time you do that it will reset your BIOS setting.

BIOS Pics:

How to activate Windows or MS-Office

If you are facing the problem of "windows not genuine" or "activate windows" or any other problem related to windows license so, this is the perfect solution of your problem. This method works fine with all versions of windows but i recommend you this method for windows 7 or older versions of Microsoft Windows. This method is also works with some versions of Microsoft Office.

Requirement:
1. System detail checker software(download link is given below)
2. Activation software(download link is given below)

Procedure:
For Microsoft windows activation

Turn off your internet connectivity and antivirus protection first.

Part 1 : Know your windows version(7/8/vista/xp) and edition(basic/professional/ultimate)
1. Run system detail checker software
2. Note down operating system detail
3. Close the system detail checker

Part 2 : Activate windows
1. Run the activator now
2. Click on install(after extraction another box will open)
3. Now click on beginner mode
4. Select the windows version
5. Than select the perfect edition.
6. After some processing you will find your windows status "activated" in system property.

Note : If windows is still not activated then
1.Restart your system
2.Open command prompt with administrative rights
3.Type a command "slmgr.vbs /upk" without quotes
4.Restart your system again
5.Now repeat the whole procedure "part 2 activate windows" again this time it will absolutely gonna work.

Procedure:
For Microsoft Office activation
1.Select advanced mode
2.Select office kms activator
3.Install KMService by selecting KMservice install/uninstall
4.Select forever office KMS Activation

Downloads:
Click here to download System detail checker
Click here to download activation software

Video Tutorial:

Windows Run Commands

This post is all about Windows Run. The Run command is used to directly open an application or document whose path is known. It functions more or less like a single-line command line interface.To open Run we need to press "windows key + R"  together or select directly from start menu.

Commands:

1. Windows Address Book Import Utility - wabmig

2. Windows Explorer - explorer

3. Add Hardware Wizard - hdwwiz.cpl

4. Add/Remove Programs - appwiz.cpl

5. Administrative Tools - control admintools

6. Automatic Updates - wuaucpl.cpl

7. Bluetooth Transfer Wizard - fsquirt

8. Calculator - calc

9. Certificate Manager - certmgr.msc

10. Character Map - charmap

11. Check Disk Utility - chkdsk

12. Clipboard Viewer - clipbrd

13. Command Prompt - cmd

14. Component Services - dcomcnfg

15. Computer Management - compmgmt.msc

16. Control Panel - control

17. Date and Time Properties - timedate.cpl

18. DDE Shares - ddeshare

19. Device Manager - devmgmt.msc

20. Direct X Troubleshooter - dxdiag

21. Disk Cleanup Utility - cleanmgr

22. Disk Defragment - dfrg.msc

23. Disk Management - diskmgmt.msc

24. Disk Partition Manager - diskpart

25. Display Properties - control desktop

26. Display Properties - desk.cpl

27. Dr. Watson System Troubleshooting Utility - drwtsn32

28. Driver Verifier Utility - verifier

29. Event Viewer - eventvwr.msc

30. Files and Settings Transfer Tool - migwiz

31. File Signature Verification Tool - sigverif

32. Findfast - findfast.cpl

33. Firefox - firefox

34. Folders Properties - control folders

35. Fonts - control fonts

36. Fonts Folder - fonts

37. Free Cell Card Game - freecell

38. Game Controllers - joy.cpl

39. Group Policy Editor (for xp professional) - gpedit.msc

40. Hearts Card Game - mshearts

41. Help and Support - helpctr

42. HyperTerminal - hypertrm

43. Iexpress Wizard - iexpress

44. Indexing Service - ciadv.msc

45. Internet Connection Wizard - icwconn1

46. Internet Explorer - iexplore

47. Internet Properties - inetcpl.cpl

48. Keyboard Properties - control keyboard

49. Local Security Settings - secpol.msc

50. Local Users and Groups - lusrmgr.msc

51. Logs You Out Of Windows - logoff

52. Malicious Software Removal Tool - mrt

53. Microsoft Chat - winchat

54. Microsoft Movie Maker - moviemk

55. Microsoft Paint - mspaint

56. Microsoft Syncronization Tool - mobsync

57. Minesweeper Game - winmine

58. Mouse Properties - control mouse

59. Mouse Properties - main.cpl

60. Netmeeting - conf

61. Network Connections - control netconnections

62. Network Connections - ncpa.cpl

63. Network Setup Wizard - netsetup.cpl

64. Notepad - notepad

65. Object Packager - packager

66. ODBC Data Source Administrator - odbccp32.cpl

67. On Screen Keyboard - osk

68. Outlook Express - msimn

69. Paint - pbrush

70. Password Properties - password.cpl

71. Performance Monitor - perfmon.msc

72. Performance Monitor - perfmon

73. Phone and Modem Options - telephon.cpl

74. Phone Dialer - dialer

75. Pinball Game - pinball

76. Power Configuration - powercfg.cpl

77. Printers and Faxes - control printers

78. Printers Folder - printers

79. Regional Settings - intl.cpl

80. Registry Editor - regedit

81. Registry Editor - regedit32

82. Remote Access Phonebook - rasphone

83. Remote Desktop - mstsc

84. Removable Storage - ntmsmgr.msc

85. Removable Storage Operator Requests - ntmsoprq.msc

86. Resultant Set of Policy (for xp professional) - rsop.msc

87. Scanners and Cameras - sticpl.cpl

88. Scheduled Tasks - control schedtasks

89. Security Center - wscui.cpl

90. Services - services.msc

91. Shared Folders - fsmgmt.msc

92. Shuts Down Windows - shutdown

93. Sounds and Audio - mmsys.cpl

94. Spider Solitare Card Game - spider

95. SQL Client Configuration - cliconfg

96. System Configuration Editor - sysedit

97. System Configuration Utility - msconfig

98. System Information - msinfo32

99. System Properties - sysdm.cpl

100. Task Manager - taskmgr

101. TCP Tester - tcptest

102. Telnet Client - telnet

103. User Account Management - nusrmgr.cpl

104. Utility Manager - utilman

105. Windows Address Book - wab

Run preview:

How to make folder with name con

Do you know, there are some keywords that we can't use as folder name like con because these keywords are reserved by Microsoft for some reasons.Go ahead, try by yourself but let me tell you, if you will somehow manage it then you will not be able to delete it.

Procedure:

Creation:
1. Open command prompt with administrative rights.
2. Go to your d drive by typing the command d: then hit enter.
Note: Do not use c drive because c drive is windows drive or system drive. If something happen accidentally then you might not be able to start your system again.
3. Now type the command without quotes "mkdir \con" and hit enter.

Deletion:
1. Open command prompt again with administrative rights.
2. Switch to d drive by command "d:"(without quotes).
3. Now type "rmdir con\"(without quotes) and hit enter.

Full video tutorial :

Facebook Keyboard Shortcuts

Do you ever face the situation in which your mouse stops working suddenly and you still want to use facebook. Don't panic because there is always a way to use facebook with the help of keyboard. so here is something special for you.

For google chrome users:

1. Alt+1 = Home page
2. Alt+2 = Your profile page
3. Alt+3 = Friend requests
4. Alt+4 = Your messages
5. Alt+5 = Notifications
6. Alt+6 = Account page
7. Alt+7 = Privacy
8. Alt+8 = Facebook page
9. Alt+9 = Facebook Terms/Agreement
10. Alt+0 = Facebook help center
11. Alt+/ = Search
12. Alt+m = Compose a new message
13. Alt+? = Cursor in search box

For firefox users:

1. Shift+Alt+1 = Home page
2. Shift+Alt+2 = Your profile page
3. Shift+Alt+3 = Friend requests
4. Shift+Alt+4 = Your messages
5. Shift+Alt+5 = Notifications
6. Shift+Alt+6 = Account page
7. Shift+Alt+7 = Privacy
8. Shift+Alt+8 = Facebook page
9. Shift+Alt+9 = Facebook Terms/Agreement
10. Shift+Alt+0 = Facebook help center
11. Shift+Alt+? = Cursor in search box
12. Shift+Alt+m = Compose a new message

For internet explorer users:

1. Alt+1+Enter = Home page
2. Alt+2+Enter = Your profile page
3. Alt+3+Enter = Friend requests
4. Alt+4+Enter = Your messages
5. Alt+5+Enter = Notifications
6. Alt+6+Enter = Account page
7. Alt+7+Enter = Privacy
8. Alt+8+Enter = Facebook page
9. Alt+9+Enter = Facebook Terms/Agreement
10. Alt+0+Enter = Facebook help center
11. Alt+?+Enter = Cursor in search box
12. Alt+m+Enter = Compose a new message

How to disable or lock USB ports

Sometimes it happens that we don't want people to use USB media or storage devices in our computer or laptop only because of the virus but in some special cases we can't refuse to use some devices.In that case, we can disable the USB ports by doing some settings in windows in such a way people can't detect it

procedure:

1. Go to run by pressing windows+R keys or you access it from start menu.

2. Type regedit as it is.

3. Now in registry editor console click on HKEY_LOCAL_MACHINE.

4. Then go to system.

5. click on CurrentControlSet.

6. Next click on services.

7. Now go to USBSTOR.

8. Double click on 'Start' where value is 3.

9. Now change the value data with 4.

10. Press ok and refresh your desktop your USB port is disabled.

Note: To enable the USB port again, just replace the value 4 with 3.

How to install dot net 3.5(including 3.0 and 2.0) in windows 8.1 or 8 through installation media

Some software need a platform of dot net framework  3.5, 3.0 and 2.0 to run but what if we do not have separate software and internet connectivity for download ? In that case, we can use installation media of  windows 8 (doesn't matter if the media is boot-able or not, all we need here is windows software, that's it). I always install dot not 3.5 just right after the fresh windows installation. This method works with both windows 8 and 8.1.

Requirement:

1. windows 8 software

Procedure:

1. Open command prompt with administrative rights.

2. Now type the command mention below in the image.

3. Then hit enter.

Note: Be careful while typing the command because i don't know what will happen if someone enter the wrong command.

After hitting enter:

After completion of installation:

Full video tutorial:

Access the recovery mode or CWM recovery(Clock work mode recovery) in any android device

This post is all about how to access recovery mode or you can say the hidden part of any android gadget.There are too many brands in the field of android gadgets and there are lots of different products available of every brand. So basically, I am trying to say that the market of android is too vast. That's why there are many different ways to access the recovery mode. In this post, i will show you some of them. So, don't panic. Sit tight with back straight and try one of these. It will absolutely gonna work.

Methods:

1. Access the recovery mode by pressing the volume key(some of the gadgets do not support this method or feature)

Keys may be slightly different in different gadgets but the procedure is always the same. You better search on google to find the right keys of your device, if there is any(some devices work with up volume key, some work with down volume key and some work with volume keys + home button). All you need to do is turn-off your device then press and hold the recovery key or keys and then turn-on the device(keep holding recovery keys until  you entered in recovery mode).This one is the best method because it has some advantages as well.

2. Access the recovery mode by selecting the option in developer options(some devices do not have this option)

Go to your device settings then select developer options and then select reboot or restart in recovery mode.In android 4.2 or above, the developer options are hidden by default. In that case, go to your device settings then select "about phone"and then tap 5 to 7 times on "build id".

3. Acess the recovery mode by some downloaded app

There are lots of apps in the android market which give you the direct access like Helium or Rom Manager. There are others apps also but these are the popular one's.

Here is the example of recovery mode

How to send multiple friend requests on facebook at a time

Many people know about this but majority of the people still don't have any idea about it. So for those people here is something special.

Requirement:

1. CSV extention file(its a format file. Download link is given below)

2. List of email ID's

Procedure:

I divide the entire procedure in 2 parts so anyone can understand it easily.

Part 1 :

1. Download the CSV file and open it in Ms-Excel

2. Put all e-mail ID's in coloumn B(E-mail Address) one by one(Only one ID in one cell).

3. Then save it(if asked for overwrite then select yes).

Part 2 :

1. Login to your facebook account.

2. Then open this link https://www.facebook.com/invite.php

3. Now click on "Import your email addresses" in "Invite Friends You Email" block.

4. Then click on other tools.

5. And upload that CSV file from your computer.

Download:

Click here to download CSV file

The easiest and universal way of taking remote of any system from anywhere

Requirement:

1. Internet connection

2. Software(Teamviewer)

Procedure:

1. Download the software(download link is given below or you can download it from their official website for latest version).

2. You don't need to install it, just simply run it (Both options are available there).

3. It will ask you the user id and password of the other system which you wanted to take remote.

Example:

Suppose you are the person A and you want to take remote of person B.make sure both systems are connected to internet. Now you need to run the software in both system. then simply put the user id and password of person B system in Person A system and enjoy.

4. So enter the id and password of other system.

Downloads:

Click here to download above mentioned software

Remove password of any windows account

Requirement:

1. Pen Drive(1Gb is enough)

2. Package of files (Download link is given below)

Procedure:

The whole process is divided in two parts :

1. Make pen drive bootable with the help of package of files.

2. Crack password of protected user with the help of pen drive.

Part 1:

1. Format the pen drive in fat32 file system.

2. Now extract the downloaded package.

3. Copy all the files in pen drive.

4. Open command prompt with admin rights.

5. Now type the letter of pen drive with colon symbol (suppose j is my pen drive letter so I will type j:) then press enter.

6. Now type “syslinux.exe –ma j:” (remember j is drive letter so replace it with yours and quotes are not included, just for better understanding).

7. Then press enter.

8. If it says nothing, it probably did install the bootloader.

Part 2:

1. Setup your bios on pen drive boot (I can not tell you how to do it but I can only say that you should google it with your motherboard brand and model number)

2. When you start the computer with usb boot you will see the first screen which shows copyright information and driver option information. Do nothing with the driver option, leaving program automatically select.

3. When it stop for user respose simply press enter key it will automatically select the windows installation drive

4. Now select volume by press the number written in front of the volume

5. Now select the path of registry just by pressing the enter key.

6. Select password reset[sam] by pressing the number key shown in the front

7. Now select the password protected user from the list

8. At User Edit Menu, select Clear (blank) user password. With the prompt that you had cleared the user password

9. The next steps are that follow the prompt to save user data and quit

Downloads:

Click here to download package of files

How to install windows 7 or 8

Requirement:
1. Windows 7 or bootable installation media.

Process:
1. Insert bootable disk of windows 7,8 or 8.1 in your CD-ROM or writer(whatever you have).
2. Now turn on your system(Laptop or desktop).
3. Press any key when asked.
4. Now wait for a while.
5. Now select the language and time etc. and press “next” button.
6. Again press “install now” button.
7. Select the appropriate edition like x86 or x64 and ultimate or professional and press next (this one showed up only if there is more than one edition in one media).
Note: Always remember one thing if you got 4gb of ram in your system or more than that then select x64 otherwise select x86.
8. Then accept the license terms and press next.
9. Select “custom(advanced)” installation type and press next.
10. Select the partition in which you want to install the windows then go to “drive option(advance)” and then format the partition by selecting “format” then next.
Note: If you want to create or delete partitions you need to select the partition then select delete/new. At the time of creation you need to mention the size in MB(1gb=1024mb).
11. Now wait for a while it’s a time consuming process. It will restart several times during the installation.
12. After the installation it will ask you the general things so don’t panic read carefully and answer it gently.
13. After the installation it will ask you the general things so don’t panic read carefully and answer it gently.

Here is the full installation video tutorial

Windows 7 Installation

Windows 8 Installation

How to make pen drive or usb flash drive bootable

Requirement:

1. Windows installation disk

2. Pendrive or usb flashdrive(for windows xp 1gb pen drive is enough but for other versions like vista,seven or 8 minimum 4gb drive is necessary)

3. Winsetupfromusb(it’s a freeware software you can easily find it by google search)

Procedure:

1. Insert the windows installation disk

2. Install the software(winsetupfromusb)

3. Connect the pendrive and format it in ntfs format

4. Run the software

5. Now select :

   a. Windows 2000/xp/2003 source = windows xp installation disk (only if you are creating windows xp bootable pen drive otherwise leave it blank)

   b. USB disk selection = your pen drive

   c. Force target disk type = removable

  d. You may also add = Check vista/7 setup/PE/RecoveryISO and select the windows installation disk(only if you are not creating xp bootable drive otherwise leave it unchecked)

   e. Press the go button

   f. Its done now all you need to do is wait because it’s a time consuming process so good luck with that.

Click here to download software